Neets TanGo + 7” Bundle
7" Touch and TanGo bundle
One screen for your your AV equipment
Perfect for video conferencing
Go online with a press of a button
Control the room with ease
Intuitive interfaces
The centre of everything in the room
TanGo and Neets Touch panels are a fantastic match and makes users able to control just about everything electronic device in the room, AV equipment, Lighting, Heating and Curtains, just to name a few.Perfect for video conferencing
The 7" panel is perfect for online connected rooms such as meeting rooms or classrooms. Making control of camera pan/tilt/zoom and selecting to record the meeting plus levels on speakers outputs and microphone inputs a breeze to control.Wall or table mounted
Fits standard 1-gang DK, EU or US back box. Wall bracket included. Table mount is an accessoryPoE Powered
Power the TanGo through a PoE injector or switch and take the power from the PoE output on the TanGo to feed the Touch Panel, thus only occupying one LAN port. (PoE injector not included)
A complete meeting room solution
Table Stand
Put your touch panel at the centre
Place your touch panel in the centre of the room
Made from high durability steel
Magnetic mounting
Minimalistic design that fits any interior design
Available in black and white
SoundBar SB -1
Bring your messages to life
Professional quality audio
Voice enhancing technology
Compatible with every Neets control system
Available in 5 vibrant colors
Can be placed on a stand or wall mounted
Technical Specifications:
Bundle product no: 313-1001
Neets 7" Touch Panel
Part no: 313-0001
Physical Dimensions:
H: 120 mm / 4.72 inches
W: 180 mm / 7.08 inches
D: 41,4 mm / 1.63 inches
-On wall: 16mm / 0.63 inches
Weight:
Product: 0,33 Kg
Wall Bracket: 0,175 Kg
Shipping: 0,85 Kg
Environment:
Operating Temp: 0 to 40 °C
Storage Temp: 0 to 60 °C
Connections:
RJ45 with PoE – For both Power and Ethernet communication
Micro USB (for FW upgrade only)
Switches:
Pin hole switch:
1: Access to Admin settings
2: Factory Reset switch
3: For FW upgrade only
Touch Screen:
Scratch resistant glass-on-glass touch screen
Display:
7” IPS Display
Resolution: 1024x595 pixels
Dpi : 170
Brightness: 350 nits (cd/m2)
LED Backlight Lifetime: 20000 hours
Sensors:
Proximity sensor – For automatic display activation
Ambient Light sensor – For automatic backlight dimming
Power:
Power over Ethernet (PoE), IEEE802.3af, 48V
Class 3 (up to 13 watt)
Note: PoE Injector not included.
Link to compliant PoE Injector
Compliancy; CE, FCC
Neets Control - TanGo
Part no: 310-0305
General:
Width: 218 mm
Height: 37 mm
Depth: 70 mm
Width: 8,58 inches
Height: 2,76 inches
Depth: 1,46 inches
Weight: 0.5 kg.
Shipping weight: 1.0 kg.
Shipping dimension: 282 mm / 188 mm /
(W/D/H) 55 mm
Storage temperature -20 °C to 50 °C
Storage moisture Non-condensing
Operation temperature 0 °C to 30 °C
Operation moisture Non-condensing
RS-232 / IR port:
Ports: 3 x bidirectional and 2 x unidirectional
Baud rate 1200 – 115200 bit/sec
Data bits 7, 8
Parity Even, Odd, None
Stop bits 1, 2
IR frequency 400 Hz to 500 KHz
Connector 3 pin screw block
IR learn:
IR Learn frequency 1 KHz to 150 KHz
Input / Output:
Ports 8 x I/O
Input trigger low < 1VDC
Input trigger high > 4VDC
Output type Open drain
Isolated output No
Max voltage load 24 VDC
Max current 0.5 A
Connector 4 pin screw block
Relay Output :
Voltage max 30 VDC
Current max 0.5 A
Connector 2 pin screw block
Network (LAN):
Speed 10 / 100 Mbit
Duplex modes Half or Full
DHCP Default off
Default IP 192.168.254.252
Default gateway 192.168.1.1
Default subnet mask 255.255.255.0
PoE – Power over Ethernet:
TanGo is IEEE 802.3 compliant. This entails it will work with both 802.3af and 802.3at devices
Note: PoE Injector not included. Use PoE Injector (Product Item number: 302-000508)
Approvals:
IEC/EN 61000-6-1
IEC/EN 61000-6-2
FCC Part 15, Class A
CE