NETIO PowerPDU 4C
PowerPDU 4C
NETIO PowerPDU 4C is a small 110/230V PDU (Power Distribution Unit). Each of the four IEC-320 C13 outlets can be independently controlled (On / Off / Reset / Toggle). Electrical parameters (A, W, kWh, TPF, V, Hz) are measured with high accuracy at each outlet. The device features two LAN ports (and a built-in Ethernet switch) for connecting to a LAN. Each power output supports ZCS (Zero Current Switching) to protect the connected equipment. With the NETIO Cloud service, the outputs can be controlled from anywhere. The NETIO Cloud service, provided for a fee, uses SSL security and servers in Europe.
Outputs can be controlled in the device web administration, using a mobile app or over various M2M API protocols (REST API, SNMP, MQTT, Modbus/TCP and more). Custom Lua scripts can run directly in the NETIO PowerPDU 4C. As a special feature, NETIO PowerPDU 4C provides a RS-232 serial port (green 3-pin terminal block) that can be controlled with a Lua script or used as a TCP tunnel (remote serial port).
Specifications:
Power ratings:
Supply voltage: 110/230 VAC / Max 10A
Low internal consumption: 2 to 5 W
Surge protection: Yes
Max energy 125J
Maximum applied voltage 300Vrms
Max. peak current 20/80us 4500A
Max. clamping voltage 775V
Power outputs:
4x IEC-320 C13 / Max 10A per output
PowerUp state: Yes – configurable default power-on state (On / Off / LAST)
(Zero Current Switching): Yes – configurable default state (On / Off / LAST)
(Independent Output Control): Yes
Power measurement:
4x Current [A]
4x Consumption [kWh]
4x Output power [W]
4x TPF (True Power Factor)
Frequency [Hz]
Voltage [V]
Phase [-180° to 180°]
Accuracy: better than 1% (25°C)
Communication:
2x LAN 10/100 Mbps (RJ-45)
Built-in unmanaged Ethernet switch
RS-232 serial port (3 pins: Rx, Tx, GND)
USB: Only as a 5V / 1A supply output
Mobile app: NETIO Mobile 2
FW upgrade over the Web interface: Yes
Protocols: HTTP, HTTPS, SMTP, DNS, NTP, UPnP, DHCP, SNMP, ICMP, MQTT, SSL, Modbus/TCP
Service:
Cloud connection needed for installation: No
Service: NETIO Cloud (paid service, secured by TLS)
Controls:
Main power switch
4x button for individual sockets
LED indication of current outlet states
Sound indication: Yes
Operating conditions:
Temperature: -20°C to +65°C
For indoor use only (IP30)
Package contents:
NETIO PowerPDU 4C
QIG (printed Quick Installation Guide)
Power cable (Europlug C13 by default)
Miscellaneous:
Warranty: 24 months
NETIO PowerPDU 4C: 220 x 40 x 120 (w x h x d)
Cable length: 1m
Weight: 0.8 Kg
Package: 325 x 74 x 224 mm (w x h x d)
Standards:
EN 61010-1 ed.2:2011
EN 61326-1 ed.2:2013
EN 55011 ed.3:2010
Downloads:
Product Videos: